Fn Browning M1922 Serial Numbers

  1. The FN Browning M1922 was a very popular pistol in many Armies and Police forces, till take over of Belgium through the Germans. Serial numbers: 20000 - 215000; 1. Pistols of the German Wehrmacht. FN Browning M1922 - P.626(b), P641(b). Serial number: 6-digit number right on frame.
  2. Fn Serial Number Lookup; Fn Herstal Serial Numbers; Fn Browning 1922 Serial Numbers; The FN Browning M1922 was a very popular pistol in many Armies and Police forces, till. Serial numbers: 20000 - 215000; 1. FN Browning Model 1905 / 1906 vs. FN Baby Browning: The Model 1905 is often referred to as the Model 1906, generally in the U.S.

John Moses Browning probably completed the prototype for his “New Model” pistol in 1908. This can be deduced from the fact that it was patented in Belgium on 20 February 1909, though it is often reported that the prototype was made in 1909 or even 1910. The gun was never patented or manufactured in the U.S. Manufacture of the New Model in 7.65mm by Fabrique Nationale (FN) of Belgium began late in 1912. Manufacture in 9mm Browning Short (.380 caliber) probably began a few months later. FN deliberately delayed release of the new design for nearly three years because sales of the Old Model were still brisk. Once released, the Browning Automatic Pistol, New Model, quickly supplanted the Old Model. However the Old Model (Model 1900) continued in production right up to the beginning of the Great War in 1914, in order to fulfill Belgian military contracts.

Fn Browning Model 1922 Serial Numbers This Nazi marked FN Browning model M1922 is a self loading, semi-automatic pistol that utilizes the blowback system of operation. The pistol is made from carbon steel and has a blued finish.

The year model designations 1900 and 1910 apparently did not come into use until sometime after World War I, though the guns were both always known as the Browning Automatic Pistol. By 1910, the word “Browning” was virtually synonymous with “automatic pistol” in much of Europe. FN’s instruction manuals in the 1920’s continued to refer to the gun as the “Browning Automatic Pistol, New Model,” but this gradually gave way to “Browning Automatic Pistol, Model 1910,” and after World War II to “Browning Automatic Pistol, Model 10.”

The New Model was lighter and less complicated than its predecessor, while retaining the remarkable reliability and accuracy of the Old Model. Pollard notes that the New Model is “...smaller and handier, but has a much more appreciable recoil.” Both guns are blowback operated. The 1910 model follows the Savage Automatic Pistol in placing the recoil spring around the barrel, rather than over the barrel as in the 1900 model. The recoil spring is secured by a bushing with bayonnette-style lugs on the front of the slide. The Model 1910 also incorporates a grip safety like the 1903 Colt and 1903 FN Grand Modele. The patent drawing shown in Anthony Vanderlinden’s book FN Browning Pistols: Side-Arms that Shaped World History shows a lanyard ring in the lower rear corner of the left grip, but in actual production the lanyard was an option and was rarely seen except for police and military purchases.

Unlike the Model 1900, which was only available in 7.65mm Browning (.32 ACP), the Model 1910 was offered in both 7.65mm Browning and 9mm Browning Short (.380 ACP). John Moses Browning had asked “UMC” Thomas of the Union Metallic Cartridge Company to design the .380 ACP in 1907 because Colt wanted a larger, heavier bullet for the 1903 Colt Pocket “Hammerless”. Browning specified that the case length for the new cartridge must be identical to that of the .32 ACP. The idea was that the only modification necessary for the gun to use the new cartridge would be a new barrel and magazine. The .380 barrel for what became the 1908 Colt Pocket “Hammerless” had the same external diameter as the .32 barrel for the 1903 Colt, but a slightly larger bore. When Browning set out to design the Model 1910 FN Browning, he designed it so that only the barrel need be changed to convert from one caliber to the other. The 1910 magazines for the two calibers were identical, even though they were marked 7.65mm or 9mm to match the respective barrels. The magazine holds seven rounds of 7.65mm (.32) or six rounds of 9mm Short (.380).

The relatively small size and sleek lines of the Model 1910 made it easily concealed, and the the lack of protrusions such as large sights or a slide release lever made the gun easy to draw quickly from a pocket. A 9mm (.380 ACP) Browning Model 1910 was used to assassinate the Archduke Ferdinand and his wife the Duchess Sophie Chotek, thus igniting World War I. (For many years it was thought the gun used was the “Old Model” 1900 Browning, primarily because the press at the time simply reported that the Duke and Duchess had been assassinated with a Browning pistol, and the “Old Model” was very well known, whereas the “New Model” was not.)

The grip safety on the Model 1910 directly blocks the sear (not the disconnector as reported by W.H.B. Smith), preventing it from moving downward and releasing the striker. The manual safety lever merely locks the grip safety in place so that it cannot be depressed, though an external lug on the manual safety lever also moves into a notch in the slide to prevent the slide from being opened. When the magazine is withdrawn a lever moves up and likewise blocks the grip safety from being depressed--hence, the arm cannot be fired unless the magazine is fully inserted.

The earliest grips on the 1910 FN Browning were made of checkered horn and featured a logo similar to that of the Model 1900, with a facsimile of the gun above the FN monogram in an oval at the top. These grips were only used for a few months and are now exceedingly rare. They were succeeded by checkered horn grips with the FN monogram in an oval at the top. According to Vanderlinden, horn continued in use until the beginning of World War II, after which molded plastic was used. Horn grips are easily identified by their flat backs, whereas plastic grips have depressions in their backs from the molds. After World War II wood grips were sometimes used for the Model 1910, most with rudimentary checkering, though some luxury models featured very finely checkered wooden grips.

Guns produced in the first year of production (1912-1913) have a cutout area on the lower forward portion of the slide that extends beyond the front edge of the frame. Very early on, however, this cutout area was reduced in length so that it ended just before the front edge of the frame, making a more natural-looking curve that melded with the curve of the frame and the bow of the trigger guard. Early guns with the longer cut may be considered rare.

The serial number is on the right side of the frame, just above the trigger. The right side of the slide is blank. The inscription on the left side of the slide remained the same throughout production, though there were minor changes in the characters and spacing which cannot all be reproduced here. See Vanderlinden for complete details. Guns made prior to World War I feature serif characters in upper case with the exception of the “de”.

FABRIQUE NATIONALE D’ARMES de GUERRE HERSTAL BELGIQUE
BROWNING’S PATENT DEPOSE

After World War I the inscription changed to sans-serif characters, but retianed the lower-case “de”.

FABRIQUE NATIONALE D’ARMES de GUERRE HERSTAL BELGIQUE
BROWNING’S PATENT DEPOSE

There was a return to serif characters in the 1925-1929 time period, after which the legend appeared in all upper case sans-serif letters (including the “DE”).

FABRIQUE NATIONALE D’ARMES DE GUERRE HERSTAL BELGIQUE
BROWNING’S PATENT DEPOSE

Finally, the space between “Browning’s Patent” and “Depose” was eliminated.

FABRIQUE NATIONALE D’ARMES DE GUERRE HERSTAL BELGIQUE
BROWNING’S PATENT DEPOSE

Belgian proof marks were stamped on the left side of the frame just above the trigger, and in the same location, just above, on the slide. Proof marks were also stamped on the barrel such that they could be seen through the ejection port.

There were some variations in barrel bushings over the lifespan of the gun, which are documented in Vanderlinden.

The Model 1910 FN Browning was manufactured from 1912 through 1975. Production was halted during the two World Wars, though a few were assembled from parts during the German occupation in World War II. There was no interruption in serial numbers. Year-by-year production figures are not available, but it is known that approximately 69 ,000 had been made by the beginning of World War I in 1914, and approximately 467,760 had been made by the beginning of World War II. Total production is estimated to have been 704,247.

Field Stripping

  1. Remove the magazine and make sure the chamber is empty.
  2. Use a barrel bushing key or a spanner wrench to depress the barrel bushing and turn it 90° to unlock it. Be careful because the bushing is under spring pressure.
  3. Ease the bushing off the front of the slide and remove the recoil spring.
  4. Draw the slide back to the second detent on the left side and lock it in position with the manual safety lever.
  5. Turn the barrel counterclockwise (as you face the front of the gun) approximately 90° to unlock its lugs from engagement with the slots in the frame.
  6. Lower the safety lever and draw the slide and barrel off the frame.


References

Automatic Pistols, by H.B. Pollard. WE, Old Greenwich, Connecticut. Reprint of 1921 edition.
FN Browning Pistols, Side-Arms that Shaped World History, by Anthony Vanderlinden.
Wet Dog Pub., Greensboro, NC: 2009.
John M. Browning, American Gunmaker, by John Browning and Curt Gentry. Doubleday, New York: 1964.
NRA Book of Small Arms: Vol. I, Pistols and Revolvers, by W.H.B. Smith. NRA, Washington, D.C.: 1946.
Pistols of the World, by Ian V. Hogg and John Walter. Krause, Iola, WI: 2006.
“UMC Thomas: A Recognition,” by Jim Foral. Gun Digest, 1998.

John Moses Browning probably completed the prototype for his “New Model” pistol in 1908. This can be deduced from the fact that it was patented in Belgium on 20 February 1909, though it is often reported that the prototype was made in 1909 or even 1910. The gun was never patented or manufactured in the U.S. Manufacture of the New Model in 7.65mm by Fabrique Nationale (FN) of Belgium began late in 1912. Manufacture in 9mm Browning Short (.380 caliber) probably began a few months later. FN deliberately delayed release of the new design for nearly three years because sales of the Old Model were still brisk. Once released, the Browning Automatic Pistol, New Model, quickly supplanted the Old Model. However the Old Model (Model 1900) continued in production right up to the beginning of the Great War in 1914, in order to fulfill Belgian military contracts.

The FN Model 1910 is a blowback-operated, semi-automatic pistol designed by John Browning and manufactured by Fabrique Nationale of Belgium. The FN Model 1910 was a departure for Browning. Before, his designs were produced by both FN in Europe and Colt Firearms in the United States. Since Colt did not want to produce it, Browning chose to patent and produce this design in Europe only. Mar 15, 2014 This is a late war FN/N Browning 1922 with black plastic grip panels and has some poorly stamped WaA140 stamps in the right places. The serial number is two digits with a small German b ( cursive) right after the two digits. It was captured in a Luftwaffe holster. With two mags. Here is the weird part: Somebody in the last 60 years removed the firing pin and damaged the firing pin spring.

The year model designations 1900 and 1910 apparently did not come into use until sometime after World War I, though the guns were both always known as the Browning Automatic Pistol. By 1910, the word “Browning” was virtually synonymous with “automatic pistol” in much of Europe. FN’s instruction manuals in the 1920’s continued to refer to the gun as the “Browning Automatic Pistol, New Model,” but this gradually gave way to “Browning Automatic Pistol, Model 1910,” and after World War II to “Browning Automatic Pistol, Model 10.”

Fn Browning M1922 Serial Numbers For Sale

The New Model was lighter and less complicated than its predecessor, while retaining the remarkable reliability and accuracy of the Old Model. Pollard notes that the New Model is “..smaller and handier, but has a much more appreciable recoil.” Both guns are blowback operated. The 1910 model follows the Savage Automatic Pistol in placing the recoil spring around the barrel, rather than over the barrel as in the 1900 model. The recoil spring is secured by a bushing with bayonnette-style lugs on the front of the slide. The Model 1910 also incorporates a grip safety like the 1903 Colt and 1903 FN Grand Modele. The patent drawing shown in Anthony Vanderlinden’s book FN Browning Pistols: Side-Arms that Shaped World History shows a lanyard ring in the lower rear corner of the left grip, but in actual production the lanyard was an option and was rarely seen except for police and military purchases.

Unlike the Model 1900, which was only available in 7.65mm Browning (.32 ACP), the Model 1910 was offered in both 7.65mm Browning and 9mm Browning Short (.380 ACP). John Moses Browning had asked “UMC” Thomas of the Union Metallic Cartridge Company to design the .380 ACP in 1907 because Colt wanted a larger, heavier bullet for the 1903 Colt Pocket “Hammerless”. Browning specified that the case length for the new cartridge must be identical to that of the .32 ACP. The idea was that the only modification necessary for the gun to use the new cartridge would be a new barrel and magazine. The .380 barrel for what became the 1908 Colt Pocket “Hammerless” had the same external diameter as the .32 barrel for the 1903 Colt, but a slightly larger bore. When Browning set out to design the Model 1910 FN Browning, he designed it so that only the barrel need be changed to convert from one caliber to the other. The 1910 magazines for the two calibers were identical, even though they were marked 7.65mm or 9mm to match the respective barrels. The magazine holds seven rounds of 7.65mm (.32) or six rounds of 9mm Short (.380).

The relatively small size and sleek lines of the Model 1910 made it easily concealed, and the the lack of protrusions such as large sights or a slide release lever made the gun easy to draw quickly from a pocket. A 9mm (.380 ACP) Browning Model 1910 was used to assassinate the Archduke Ferdinand and his wife the Duchess Sophie Chotek, thus igniting World War I. (For many years it was thought the gun used was the “Old Model” 1900 Browning, primarily because the press at the time simply reported that the Duke and Duchess had been assassinated with a Browning pistol, and the “Old Model” was very well known, whereas the “New Model” was not.)

The grip safety on the Model 1910 directly blocks the sear (not the disconnector as reported by W.H.B. Smith), preventing it from moving downward and releasing the striker. The manual safety lever merely locks the grip safety in place so that it cannot be depressed, though an external lug on the manual safety lever also moves into a notch in the slide to prevent the slide from being opened. When the magazine is withdrawn a lever moves up and likewise blocks the grip safety from being depressed--hence, the arm cannot be fired unless the magazine is fully inserted.

The earliest grips on the 1910 FN Browning were made of checkered horn and featured a logo similar to that of the Model 1900, with a facsimile of the gun above the FN monogram in an oval at the top. These grips were only used for a few months and are now exceedingly rare. They were succeeded by checkered horn grips with the FN monogram in an oval at the top. According to Vanderlinden, horn continued in use until the beginning of World War II, after which molded plastic was used. Horn grips are easily identified by their flat backs, whereas plastic grips have depressions in their backs from the molds. After World War II wood grips were sometimes used for the Model 1910, most with rudimentary checkering, though some luxury models featured very finely checkered wooden grips.

Guns produced in the first year of production (1912-1913) have a cutout area on the lower forward portion of the slide that extends beyond the front edge of the frame. Very early on, however, this cutout area was reduced in length so that it ended just before the front edge of the frame, making a more natural-looking curve that melded with the curve of the frame and the bow of the trigger guard. Early guns with the longer cut may be considered rare.

The serial number is on the right side of the frame, just above the trigger. The right side of the slide is blank. The inscription on the left side of the slide remained the same throughout production, though there were minor changes in the characters and spacing which cannot all be reproduced here. See Vanderlinden for complete details. Guns made prior to World War I feature serif characters in upper case with the exception of the “de”.

FABRIQUE NATIONALE D’ARMES de GUERRE HERSTAL BELGIQUE
BROWNING’S PATENT DEPOSE

Numbers

After World War I the inscription changed to sans-serif characters, but retianed the lower-case “de”.

FABRIQUE NATIONALE D’ARMES de GUERRE HERSTAL BELGIQUE
BROWNING’S PATENT DEPOSE

There was a return to serif characters in the 1925-1929 time period, after which the legend appeared in all upper case sans-serif letters (including the “DE”).

FABRIQUE NATIONALE D’ARMES DE GUERRE HERSTAL BELGIQUE
BROWNING’S PATENT DEPOSE

Finally, the space between “Browning’s Patent” and “Depose” was eliminated.

Acdsee video studio 2 keygen. Jul 22, 2020 ACDSee Video Studio v4.0.1.1013 Crack+Free Activation KeyLatest ACDSee Video Studio Crack Enrapture your audience with the most versatile and accessible content creation tool in the space. Sporting sleek 64-bit performance, an easy-to-master interface, and 4K rendering, ACDSee Video Studio 4 empowers you to bring your vision to life. ACDSee Video Studio 2 Product Support and Resources. Screen Recording and Video Editing with Ease. Accessible, yet efficient, ACDSee Video Studio 2 is editing without any messing around. Work with existing media, or devise your own, and screen, voice, or webcam record with ease. ACDSee Photo Studio Ultimate 2020 is an all-in-one digital asset manager and layered photo editor, that ensures unparalleled number of creative graphic and image composition needs. Armed with a potent list of adjustment layers, working with layers just became non-destructive, giving you the complete flexibility to create the image composites, photo manipulations, and innovative graphics you.

FABRIQUE NATIONALE D’ARMES DE GUERRE HERSTAL BELGIQUE
BROWNING’S PATENT DEPOSE

Belgian proof marks were stamped on the left side of the frame just above the trigger, and in the same location, just above, on the slide. Proof marks were also stamped on the barrel such that they could be seen through the ejection port.

There were some variations in barrel bushings over the lifespan of the gun, which are documented in Vanderlinden.

The Model 1910 FN Browning was manufactured from 1912 through 1975. Production was halted during the two World Wars, though a few were assembled from parts during the German occupation in World War II. There was no interruption in serial numbers. Year-by-year production figures are not available, but it is known that approximately 69 ,000 had been made by the beginning of World War I in 1914, and approximately 467,760 had been made by the beginning of World War II. Total production is estimated to have been 704,247.

Field Stripping

  1. Remove the magazine and make sure the chamber is empty.
  2. Use a barrel bushing key or a spanner wrench to depress the barrel bushing and turn it 90° to unlock it. Be careful because the bushing is under spring pressure.
  3. Ease the bushing off the front of the slide and remove the recoil spring.
  4. Draw the slide back to the second detent on the left side and lock it in position with the manual safety lever.
  5. Turn the barrel counterclockwise (as you face the front of the gun) approximately 90° to unlock its lugs from engagement with the slots in the frame.
  6. Lower the safety lever and draw the slide and barrel off the frame.


References

Automatic Pistols, by H.B. Pollard. WE, Old Greenwich, Connecticut. Reprint of 1921 edition.
FN Browning Pistols, Side-Arms that Shaped World History, by Anthony Vanderlinden.
Wet Dog Pub., Greensboro, NC: 2009.
John M. Browning, American Gunmaker, by John Browning and Curt Gentry. Doubleday, New York: 1964.
NRA Book of Small Arms: Vol. I, Pistols and Revolvers, by W.H.B. Smith. NRA, Washington, D.C.: 1946.
Pistols of the World, by Ian V. Hogg and John Walter. Krause, Iola, WI: 2006.
“UMC Thomas: A Recognition,” by Jim Foral. Gun Digest, 1998.

This Nazi marked FN Browning model M1922 is a self loading, semi-automatic pistol that utilizes the blowback system of operation. The pistol is made from carbon steel and has a blued finish. It has been chambered for the 7.65mm Browning(.32 ACP) cartridge. It is fed by a single stack 8 round detachable box magazine. This pistol is striker fired and incorporates a front blade sight and a V notch rear sight that is drift adjustable for windage only. The barrel length is 4 1/2 inches and contains 6 grooves with a right hand twist. The total length of the pistol is 7.01 inches and it has an unloaded weight of at 25.7 ounces. On the pistol's butt there is a European style heel magazine release. This firearm does not incorporate any type of slide hold open mechanism to inform the operator that the last round has been fired. Although the manual safety lever can be pushed upward and engaged with a notch in the slide which will lock it open for general cleaning. The checkered grip panels are made from Walnut.

Yugoslavian Fn Browning M1922 Value

The Fabrique Nationale d'Armes de Guerre or National Factory of Weapons of War Herstal Belgium or simply FN for short, was established in 1889 when the Belgium government decided to build 150,000 Mauser model 1888 rifles for the Belgium military. Eleven years later, FN entered into a long lasting relationship with the firearms designer John Moses Browning. The M1922 was designed after John Brownings M1910 pistol.

Browning M1922 Pistol Serbian Yugoslavian Fabrique National

In 1922, Browning modified the M1910 pistol to suit the requirements of the military of the Kingdom of Serbs, Croats and Slovenes which today is known as Yugoslavia after being renamed in 1929. Browning and the FN Bureau d'Etudes or Research and Development Office took the M1910 and lengthened the slide by adding a removable frontal portion, added a lanyard ring, they also lengthened the barrel and elongated the grip frame which gave the magazine more capacity. This newly designed pistol would come to be known as the FN M1922 and was just what the Kingdom of Serbs, Croats and Slovenes had wanted and on February 28, 1923 they ordered 60,000 pistols. This also gives the M1922 the distinction of being developed solely at the request of a customer rather then being targeted for a particular market.

In 1940, Nazi Germany occupied Belgium and took over production of the M1922 at the FN plant. The Germans had two different designations for the M1922 pistol. Depending on the caliber, these pistols were designated as either the Pistole 626(b) for the 7.65mm version or Pistole 641(b) for the 9mm Short version. The (b) was an abbreviation for belgisch indicating Belgium. Another Heereswaffenamt name for the M1922 was Die Lange Browning Pistole or The Long Browning Pistol. The pistol has also been called the 1910/22 or 10/22 which is short for 1910/1922. An interesting note is that the Browning model M1922 was produced in larger numbers than any other firearm at the Fabrique Nationale plant during the Nazi occupation of Belgium. In 1944, Belgium was liberated by the Allies and production of the M1922 continued with most of these post war pistols going to fill military and government contracts.

Up until around 1942, the M1922 was made available as a commercial pistol being offered as a sidearm for factory security personnel and police. The model M1922 pistol was very popular with the German officer's and many took this pistol as their official sidearm. The primary user however of the M1922, was the German Luftwaffe(air force). The M1922 pistols that were accepted by the German military will have one of three Waffenamt stampings or Weapons Office inspectors stamps. These would be WaA 103, WaA 140, and/or WaA 613 which indicate the following..

WaA 103 = Fabrique Nationale d'armes de guerre, Lüttich (Liège) Belgium (January 1941 - May 1942).

WaA 140 = Fabrique Nationale d'armes de guerre, Lüttich (Liège), Belgium (Late 1941 - to liberation in 1944).

WaA 613 = Fabrique Nationale d'armes de guerre, Lüttich (Liège), Belgium (May 1940 - early 1941).

The Waffenamt stamping, WaA140 on the pistol featured on this page was used from the 1941 to the liberation of Belgium in 1944 with approximately 325,000 of these 7.65mm pistols being produced. The serial numbers for these pistols started around the 67,000 to 68,000 range and proceeded to approximately serial number 155,000.

Fn Browning M1922 Serial Numbers Online

At the end of 1943, serialization of these pistols was changed so that it limited serial numbers to five digits and a one letter suffix. The letter indicated a block of 100,000 pistols. So for example, a serial number of 55555c is actually the 355,555th pistol that was produced. The first block of 100,000 had no suffix, then pistols numbered 100,000 through 199,999 were suffixed with the letter a, pistols in the range of 200,000 through 299,999 were suffixed with a b and so on.

Due to the increase in demand for arms during the war, the serial number markings were simplified in 1944 to include just the full serial number on the slide and the last four digits of the serial number on the frame. The pistol pictured above has a six digit serial number with no letter suffix.

The FN M1922 pistol has been used by numerous countries including: Yugoslavia, Holland, Greece, Turkey, Romania, France, Denmark, Nazi Germany and later West Germany. It is an smoothly elegant and graceful pistol design that became immensely popular with both the military and the commercial markets.

Fn Browning M1922 Serial Numbers Today

The Fabrique Nationale firm is still in business today and is a subsidiary of the Herstal Group. The company now owns the Winchester U.S. Repeating Arms Company as well as the Browning Arms Company which was founded by the family of John Moses Browning. They are now located in Columbia, South Carolina in the U.S.A. The FN Manufacturing LLC company is responsible for the development of U.S. government contracted military and law-enforcement weapons.